超声共振法测定圆柱体材料弹性常数的影响因素分析

为明确超声共振频谱分析法(RUS)测定圆柱体试样弹性常数的影响因素, 由此针对各向同性圆柱体开展实验, 观察圆柱体试样测量结果的分散性和稳定性, 且主要研究横纵比和有效模态数量对测量结果的影响, 并与拉伸试验的结果进行比较. 以测量结果标准差、变异系数和95%置信度下均值的区间估计3个指标来衡量结果的稳定性和分散性, 且从模态简并角度对实验结果进行分析. 最终结果表明, 当超声共振频谱分析法的有效模态数量在17左右、试样横纵比接近1时, 测量结果的稳定性和分散性较小.     

New measurements and reanalysis of 14N elastic scattering on 10B target

The angular distributions of elastic scattering of ¹⁴N ions on ¹⁰B targets have been measured at incident beam energies of 21.0 and 24.5 MeV. Angular distributions at higher energies 38–94.0 MeV (previously measured) were also included in the analysis. All data were analyzed within the framework of the optical model and the distorted waves Born approximation method. The observed rise in cross sections at large angles was interpreted as a possible contribution of the α-cluster exchange mechanism. Spectroscopic amplitudes SA₂ and SA₄ for the configuration ¹⁴N→ ¹⁰B +α were extracted. Their average values are 0.58±0.10 and 0.81±0.12 for SA₂ and SA₄, respectively, suggesting that the exchange mechanism is a major component of the elastic scattering for this system. The energy dependence of the depths for the real and imaginary potentials was found.     

Applicability of ~9Be global optical potential to reactions of ~(7,10,11,12)Be

Elastic scattering angular distributions and total reaction cross-sections of ~(7,10,11,12)Be projectiles are predicted by the systematic ~9 Be global phenomenological optical model potential for target mass numbers ranging from24 to 209. These predictions provide a detailed analysis by their comparison with the available experimental data.Furthermore, these elastic scattering observables are also predicted for some targets out of the mass number range.The results are in reasonable agreement with the existing experimental data, and they are presented in this study.     

Fluid‐structure coupling of linear elastic model with compressible flow models

Cavitation erosion is caused in solids exposed to strong pressure waves developing in an adjacent fluid field. The knowledge of the transient distribution of stresses in the solid is important to understand the cause of damaging by comparisons with breaking points of the material. The modeling of this problem requires the coupling of the models for the fluid and the solid. For this purpose, we use a strategy based on the solution of coupled Riemann problems that has been originally developed for the coupling of 2 fluids. This concept is exemplified for the coupling of a linear elastic structure with an ideal gas. The coupling procedure relies on the solution of a nonlinear equation. Existence and uniqueness of the solution is proven. The coupling conditions are validated by means of quasi‐1D problems for which an explicit solution can be determined. For a more realistic scenario, a 2D application is considered where in a compressible single fluid, a hot gas bubble at low pressure collapses in a cold gas at high pressure near an adjacent structure.     

大处着眼，小处入手——基金委化学科学部2019年基金项目会议评审工作的几点尝试和思考

The National Natural Science Foundation of China (NSFC) is a vital government agency supporting basic research and people to create knowledge and meet major national needs, where a rigorous and objective merit-based peer review mechanism is the key to funding the most promising research proposals. This invited comment overviews some recent attempts aimed at bettering the academic evaluation environment at the Department of Chemical Science in 2019, through measures such as grouped panel committee meetings, standardized panel committee meeting procedures, and review process refinement to improve the project review at panel committee meeting levels.     

First-principles investigation on ideal strength of B2 NiAl and NiTi alloys

For B2 NiAl and NiTi intermetallic compounds, the ideal stress–strain image is lack from the perspective of elastic constants. We use first-principles calculation to investigate the ideal strength and elastic behavior under the tensile and shear loads. The relation between the ideal strength and elastic constants is found. The uniaxial tension of NiAl and NiTi along <001> crystal direction leads to the change from tetragonal path to orthogonal path, which is driven by the vanishing of the shear constant C(66). The shear failure under {110}{111} shear deformation occurring in process of tension may result in a small ideal tensile strength(~ 2 GPa) for NiTi. The unlikeness in the ideal strength of Ni Al and Ni Ti alloys is discussed based on the charge density difference.     

三层流体中斜入射波作用下半无限板的水弹性响应

解析地研究了在三层流体中斜入射波浪与半无限弹性板的相互作用引起的波散射和板的水弹性响应. 三层流体在界面处的密度发生阶跃, 各层为一常数. 假设流体不可压缩、无黏、流体运动无旋. 在线性势流理论框架下, 使用本征函数展开法和内积式给出波板相互作用的半解析解. 根据色散关系分析, 得到了表面波模态和界面波模态入射时的临界入射角. 随着物理参数的变化, 临界角将随之发生变化. 临界角决定了当由开阔水域向板覆盖水域传播的表面波或界面波的存在性: (1)板覆盖水域入射界面上, 透射波能否存在; (2)入射界面之上界面中, 板覆盖水域中的透射波以及开阔水域中的反射波能否存在. 当下界面波入射时并且入射角足够大时, 开阔水域中的下界面波模态是整个流体域中唯一存在的模态.      

理想弹塑性固体Riemann问题的解结构与初值条件

针对理想弹塑性固体材料的一维Riemann问题，在不考虑真空的情况下，讨论其所有可能存在的解结构，给出每一种解结构下对应的初值条件且证明该系列初值条件的完备性，即任意给定的物理量初值均有且只有一种解结构与之对应.基于该理论，在设计精确或近似理想弹塑性Riemann问题求解器时，可以依据初值条件对任意物理量初值直接判断其对应的解结构，从而提高求解器的精度和效率.数值试验验证了该系列初值条件的正确性和有效性.